Header Slice

Adobe Acrobat PDF logoDownloadable brochure

Wallenstein BX32, BX42, BX62 PTO Woodchippers

If you are looking for quality, you are looking for a Wallenstein Woodchipper. Built to last, the Wallenstein wood chippers are in a league of their own.
Priced to sell and ready to impress!

So good ~  We give you a 3 Year Warranty*

Wallenstein BX42 and BX62 Woodchippers
This is a complete unit including the base and the manual feed hopper. 

PTO shaft and shear bolts come standard.

Comparison Shopping? Use Our Printable Comparison Form

The BX32, BX42 and BX62 woodchippers are designed to chip wood into valuable wood chips with an oversize heavy duty rotor and reversible chipping blades. The large diameter rotor has a faster tip speed for improved chipping action and the heavy gauge steel keeps your momentum to power through 3”, 4” and 6” diameter tree trunks.






Click Below for a Freight Quote

The best Quotes for shipping wood chippers are Business to Business shipments.
If you know of a business address to ship to—it is more cost effective. It needs to be zoned commercial, have business hours, business signage, turnaround for a 55 ft. tractor trailer and a forklift. Perhaps you know of a local hardware store, lumber yard, feedmill, landscape shop, welding shop, car parts store etc. that could accept your delivery. Shipping to the nearest terminal is also a good option.

BX42 Woodchipper

 Free Freight Quote

BX62 Woodchipper

Free Freight Quote 

Contact Us

Drive System
Direct drive, PTO w/ shearbolt

HP requirements for max. cap.




HP Range




Chipper Capacity

3” Dia.

4" Dia. (max. 10" slab)

6" Dia. (max. 12" slab)

Chipper Housing Opening

6” x 3”

4" x 10"

6½" x 12"

Rotor Size




Number of Rotor Knives

2 offset



Knife Type
Hardened tool steel

Rotor Weight

45 lbs

74 lbs.

197 lbs.

Feeding System Feed

Self Feed

Self Feed

Self Feed

Mounting System

3 Point Hitch

3 Point Hitch

3 Point Hitch

Dimensions (Hopper Folded)

54”L x 36”W x 60”H

40"L x 42"W x 60"H

50"L x 52"W x 74"H

Hopper Opening

12½” x 11½”

20" x 20"

25" x 25"

Discharge Hood Rotation




Discharge Hood Height




Rated RPM





320 lbs.

425 lbs.

770 lbs.

Easy Access to Wallenstein BX Woodchipper Blades and Rotor!


North American Made!

 Just across Lake Erie in Ontario, Canada is a region known for its superior steel and quality workmanship known as the Kitchener Area. This is home to EMB Manufacturing, the makers of Wallenstein Farm and Forestry Equipment.


Here's an email we recently received from a customer:

Hello Karen & Marlin:

Wanted to write to tell you how happy I am with my Wallenstein BX 42 chipper. I had to shorten the driveshaft a bit before I could use it but that was no big deal. I was also a little concerned about the gravity feed feature until I tried it for the first time. I had only used self-powered, hydraulic-feed chippers in the past so I didn't quite know what to expect with the PTO-driven, gravity-feed type. I was quite impressed with both the ease of feeding (most material feeds itself all the way in) and with the quality of the chips (consistent size and few unbroken twigs). The discharge chute also works well in both the distance and direction of chip placement. It is quite easy to fill wheelbarrows with chips with very little mess on the ground. The chipper is well matched to my 30 hp Kioti (CK30 HST) tractor and it runs effortlessly with no "bogging down" of the engine and not a single jam in about 20 hours of use so far. I've been chipping mostly hardwood up to 4 inches diameter.

Even my dad, who is a conservative "Old Yankee", has commented that the chipper was a "good investment". That is about the highest praise he gives on equipment.

Great machine, great price and great service. I don't think I could have asked for more.

Thanks again,

Princeton , MA 01541

For more information please contact Marlin or Karen
or call 814-349-4484, Aaronsburg, PA, Centre County

*Register Warranty Online